Mitsubishi Electric GOT2000 Series User Manual page 280

(b) Key functions
The following shows the functions of the keys that are used for the operations on the continuation error clear
screen.
1) [RET] key
Returns the screen to the PC Information monitor screen.
➠
2) [END] key
Closes the monitoring and returns the screen to the one for starting the intelligent module monitor.
3) [Select all] key
Targets all continuous errors for the continuous error releasing.
4) [Cancel all] key
Unselects all continuous errors for the continuous error releasing.
5) [Error Clear] key
The operation performed by pressing this key differs depending on the monitored PLC CPU.
• When monitoring the RCPU
All the continuation errors which have occurred are removed.
• When monitoring the LCPU
The selected continuation errors are removed.
6) Up/down scroll key
Scrolls the display one stage up or down.
8 - 18
8.4 Operation of Each Intelligent Module Monitor Screen
3)
8.4.3 Composition of PC Information monitor screen and key functions
POINT POINT POINT
Precautions for releasing continuous errors
• If the error messages are the same, the errors are released regardless of the error code.
Therefore, some error codes may be released even without the user intend to.
• The annunciator memorizes the number of annunciators detected in the CPU modules.
When canceling multiple annunciators, perform the error releasing multiple times.
• Even after executing the error releasing, the detected error record is not deleted.
1) 2)
4)
5)
6)