Setting The Security - Mitsubishi Electric GOT2000 Series User Manual

4.3.4

Setting the security

The device test window and Ladder editor screen displays can be limited by passwords.
■1. Specification of the security setting
(1) Security types
Type
Restriction by bit devices
Restriction by a password
The restriction types above can be used together.
(2) Setting method for security
Set the security setting in the [Functional Operation Security] tab in the [Environmental Setting] dialog (Security) on
GT Designer3 (GOT2000).
The following shows the setting method for each security type.
Type
Restriction by bit devices
Restriction by a password
For the setting of the [Environmental Setting] dialog, refer to the following.
➠ GT Designer3 (GOT2000) Screen Design Manual
■2. Changing screens when setting the security
Perform the operation to switch to the
device test window or Ladder editor screen.
Is the Authorization Device set?
Yes
Is the Authorization Device ON?
Yes
The changing screens is restricted by the Authorization Device.
The changing screens is authorized when the Authorization Device is ON.
The changing screens is restricted by a Password.
When changing screens, the security password input dialog box is displayed.
Select the [Authorization Device] check box of [Device Test Operation] or [Ladder
Editor Screen Display] and set bit devices.
Set [Password] of [Device Test Operation] or [Ladder Editor Screen Display].
No
No
An error message is displayed.
Description
Setting method
Is the password set?
Yes
The security password input dialog
box is displayed. Input a password.
No
Is the password correct?
Yes
The device test window or Ladder editor screen is displayed.
4.3 Display Operation
No
Touch the
key.
An error message is displayed.
4 - 19
4