How To Operate Target Selection Screen - Mitsubishi Electric GOT2000 Series User Manual

12.4.2

How to operate target selection screen

When [High speed data logger/BOX data logger], [RCPU], or [QnUDVCPU / LCPU] is selected in the target setting window,
the following screen appears.
■1. Target selection screen
(1) Displayed contents
1)
2)
3)
When [High speed data logger module / BOX data logger]
is selected
No.
Connection target list display
1)
area
2) IP address display area
3) Timeout time display area
(2) Key functions
Key
[×] / [Return]
[Update]
[Connect]
Item
Displays the list of the high speed data logger modules or the PLC CPUs which can
be accessed from the GOT.
To select a high speed data logger module or a PLC CPU, touch it in the list.
This area does not list the high speed data logger modules and PLC CPUs that are
connected through a wireless LAN.
Touch the IP address display area to display the IP address input window, and
enter the IP address of an applicable high speed data logger module or PLC CPU.
Displays the selected IP address.
➠
■2. IP Address input window
Displays the timeout time.
➠
■3. Timeout time input window
Closes the target selection screen and returns to the target setting screen.
Scrolls the display area up and down by one line.
Scrolls the display area up and down by one page.
Updates the displayed content of the connection target list.
Connects to the high speed data logger module or the PLC CPU selected from the
connection target list or the IP address.
When the password is set on the connected high speed data logger module or the PLC
CPU, the access authentication window appears.
➠
12.4.2 ■4. Access authentication window
When no password is set on the connected high speed data logger module or the PLC
CPU, the Main Menu screen appears.
➠
12.4.3 How to operate Main Menu screen
12.4 How to Operate Various Selection Screens
1)
2)
3)
When [RCPU] or [QnUDVCPU/LCPU] is selected
Display contents
Function
12
12 - 11