Step 4.
The CNC data I/O starts after the channel number is selected.
■2. Start operation using the special function switch
The CNC data I/O can be started using special function switches.
If a special function switch with the following settings is touched, the CNC data I/O screen of the set controller can be
displayed.
• Selecting [CNC Data I/O] in [Switch Action], and checking [Specify the destination to connect the screen of CNC
Data I/O]
For Q buss connection, input 2 or larger for [CPU No.] in [Network].
Operation at start differs depending on the setting contents of the special function switch.
For the setting items for the special function switch, refer to the following.
➠
GT Designer3 (GOT2000) Screen Design Manual
■3. Changing screens
Start
At the second
Utility
or later startup
user-created monitor screen
Rtn
For exiting the CNC data I/O by touching Rtn, the last exited
screen is displayed when the CNC data I/O starts next time.
or
At the first startup
Communication
setting window
Rtn
Rtn
18.3 Operations for Display
18
18 - 5