Operations For Display - Mitsubishi Electric GOT2000 Series User Manual

23.3 Operations for Display

The following explains how to display the drive recorder screen after the GOT is turned on.
Step 1.
Turn on the GOT.
Step 2.
Perform one of the following operations.
• In the utility, touch [Monitor] → [Drive recorder] from the main menu.
• Touch a module on the system configuration screen of the system launcher, and then touch [Drive
recorder] on the extended function selection screen.
• Touch the special function switch (Drive recorder) set in the project.
Step 3.
The [Select channel] window appears only at the first startup of the drive recorder.
(When the connection destination is set for the special function switch or only one channel is applicable, the
[Select channel] window does not appear.)
Touch the key corresponding to the channel No. to be used.
➠
Step 4.
The [Select station] window appears only at the first startup.
(When the connection destination is set for the special function switch, the [Select station] window does not
appear.)
Touch a history key or the [Input station number] key.
➠
When you touch the [Input station number] key, the [Input station No.] window appears.
In the [Input station No.] window, set the network number and the station number, and then touch the [OK]
key.
➠
Step 5.
The [Drive recorder information list] screen appears.
(When the connection destination is set for the special function switch, drive recorder information is read
from the connected servo amplifier automatically. Thus, the following operations are not required.)
Touch the connection destination (servo) key.
➠
Step 6.
The [Select connection destination (servo)] window appears.
Specify a servo amplifier to be connected, and touch the [OK] key.
➠
Step 7.
The [Select connection destination (servo)] window closes.
Touch the [Read] key on the [Drive recorder information list] screen to read drive recorder information from
the servo amplifier.
The method of displaying the drive recorder screen determines the type of the screen.
Method
Using the utility or the system launcher
Using a special function switch
23 - 4
23.3 Operations for Display
23.4.6 [Select channel] window
23.4.7 [Select station] window
23.4.8 [Input station No.] window
23.4 [Drive recorder information list] screen
23.4.11 [Select connection destination (servo)] window
The GOT screen is switched to the drive recorder screen.
For the details of the system launcher, refer to the following.
➠
2. SYSTEM LAUNCHER
The drive recorder screen appears as a system window.
For information on how to display the drive recorder screen with a special function switch, refer to the following.
➠
■1. Displaying the drive recorder screen with a special function switch
Description