Mitsubishi Electric GOT2000 Series User Manual page 377

(2) Error handling
When an error occurs during the trigger backup, the backup error notification device stores the trigger ID
corresponding to the trigger setting set for the backup with the error, and a system alarm occurs.
Check the system alarm, and then remove error causes.
For system alarms and corrective actions, refer to the following manual.
➠
GT Designer3 (GOT2000) Screen Design Manual
The backup error notification device stores 0 when the next trigger backup is executed.
Trigger device 1
Backup processing 1
Process notification
device 1
Backup error
notification device
Trigger backup processing
setting No. notification
(GS657)
(3) Setting send delay time
The backup/restoration function can set the delay time for backup communication intervals.
Setting of the delay time can reduce the load of other processes (such as monitoring objects) with the backup
process.
The actually time set by the set value is listed as follows.
POINT POINT POINT
Setting of trigger backup data send delay
Backup communication times are longer than a default when the trigger backup data send delay
is set.
Set the suitable delay time to match the processing condition of backup function and others
(such as monitoring objects).
Error occurs
0
1
Set value
0
1 to100
101 or more
1 0
Storing trigger ID
Storing 0 when the next
corresponding to
trigger backup is executed
backup with error
0 1
Delay time
None
Set value × 5(ms)
500(ms)
10.3 Operations for Display
10
10 - 35