Specifications; System Configuration - Mitsubishi Electric GOT2000 Series User Manual

13.2 Specifications

13.2.1

System configuration

This section describes the system configuration of the FX ladder monitor.
For connection type settings and precautions regarding the communication unit/cable and connection type, refer to the
following.
➠
■1. Target controller
*1
FXCPU
*1
■2. Connection type
This function can be used in the following connection types.
(○: Available, : Partly restricted, ×: Unavailable)
Name
Search operation Device search, defect search, etc.
Displaying word devices in DEC or
HEX
Display switching
Displaying device comments, etc.
Test operation Changing device values, etc.
Storing FX ladder monitor screen in
Hard copy
BMP/JPEG format
*1
*2
■3. Required system application (extended function)
For the system application (extended function) required, refer to the following.
➠
(1) System application (extended function)
Write the package data that contains the system application (extended function) for the FX ladder monitor to the
GOT.
For the communication method with the GOT, refer to the following.
➠
(2) System application (extended function) size
To install a system application (extended function) to the GOT, enough space in the user area is required.
For information on how to check the available space of the user area and each data size, refer to the following.
➠
■4. Display screen for the FX ladder monitor
A sequence program of up to 8 lines (one line: up to 11 contacts (12 or more contacts will be looped back)) is displayed
on a single screen.
In addition, the current values of up to 8 word devices (9 or more devices are displayed by switching the display with
the arrow key) etc. are displayed.
13 - 2
13.2 Specifications
GOT2000 Series Connection Manual (Mitsubishi Products) For GT Works3 Version1
FX3U and FX3UC are connectable.
Function
Description
The present value of V and Z cannot be changed.
The set values of T and C cannot be changed.
1.2 System Applications (Extended Functions) Required for Each Function
GT Designer3 (GOT2000) Screen Design Manual
GT Designer3 (GOT2000) Screen Design Manual
Controller
Connection form between GOT and controller
Direct CPU connection
○
○
○
*1*2
○
Reference
Ethernet connection
○
○
○
*1*2
○
section
13.6
13.5
13.7
13.4.2