Mitsubishi Electric GOT2000 Series User Manual page 352

(8) Q series motion controller CPU
Item
Motion SFC program conversion
file (control code)
Motion SFC program conversion
file (text)
Motion SFC parameter file
K code file
System setting data file
High speed read setting file
Optional data monitor setting file
Servo data file
Mechanical system program
conversion file
Cam data conversion file
Cam Edit data
Vision sensor parameter
User safety sequence program
Mark detection setting data
Q series PLC common parameter
file
Multiple CPU high speed refresh
setting
*1
*2
*3
*4
*5
*6
10 - 10
10.2 Specifications
File where SFC code, G-code and F/FS code files are
combined and converted into CPU's Motion SFC program
code memory storage format
File where G list and F/FS list files are combined and
converted into CPU's Motion SFC program text memory
storage format
Motion SFC control parameter setting information files
Internal code files of servo program
System setting data information files
High speed read setting information files
Optional data monitor information files
Axis data parameter block information files
Servo parameter information files
Servo parameter information files
Limit switch setting data information files
File after conversion of mechanical system program edit
information file into internal codes
Cam data files of cam No.1 to 64
Cam data files of cam No.101 to 164
Cam data files of cam No.201 to 264
Cam data files of cam No.301 to 364
Cam Edit data files
Vision sensor parameter setting information files
Safety sequence program files
Mark detection setting data
Data files of Multiple CPU setting, I/O assignment, and
others
Multiple CPU high speed refresh setting information files
The data can be backed up or restored only with the Q172DCPU, Q173DCPU, Q170MCPU, or Q170MSCPU.
The data can be backed up or restored only with the Q172HCPU, Q173HCPU, Q172CPU, Q173CPU, Q172CPUN, or
Q173CPUN.
The data can be backed up or restored only with the Q172HCPU or Q173HCPU.
The data can be backed up or restored only with the Q172CPU, Q173CPU, Q172CPUN, or Q173CPUN.
The data can be backed up or restored with the SV22 operating system software only.
The data can be backed up or restored only with the Q172HCPU, Q173HCPU, Q172DCPU, Q173DCPU, Q170MCPU, or
Q170MSCPU.
Description File name
sfcprog.cod
sfcprog.bin
*1
sfcprmD.bin
*2
sfcprm.bin
svprog.bin
*1
svsystemD.bin
*3
svsystemH.bin
*4
svsystem.bin
*1
svlatchD.bin
*2
svlatch.bin
*1
svsysmonD.bin
*2
svsysmon.bin
*1
svdataD.bin
*3
svdataH.bin
*3
svparaH.bin
*4
svdata.bin
*4
svdata2.bin
svls.bin
*5
svmchprm.bin
*5
svcamprm.bin
*5
svcampr2.bin
*5
svcampr3.bin
*5
svcampr4.bin
svcameditD.bin
visionD.bin
safetyD.bin
svmarkD.bin
param.wpa
*1
svrefresh.bin