Mitsubishi Electric GOT2000 Series User Manual page 289

3) [High-speed counter monitor]
Displays the operation status of the high-speed counter function.
The operation status is displayed or hidden according to the parameter settings of built-in functions.
4) [Preset value set]
Displays the current value of the CH1 and CH2.
Touch the current value and the data change window is displayed.
➠ (3) Data change window
(b) Key functions
The following shows the functions of the keys that are used for the operations on the high-speed counter monitor
screen.
1) [RET] key
Return to the unit detail info screen.
➠
8.4.4 Composition of the unit detail info screen and key functions
2) [END] key
Closes the monitoring and returns the screen to the one for starting the intelligent module monitor.
3) [Exec.] key
Reflects the preset value entered in the data change window to the PLC CPU.
4) [CH1] key, [CH2] key
Reset the error of CH1 or CH2.
POINT POINT POINT
Precautions for using the high-speed counter monitor screen.
• When the parameter settings of a built-in function is changed by programming software or
others of the connecting device during the high-speed counter monitor screen display, return to
the unit detail info screen and display the high-speed counter monitor screen again.
• The preset value preset from the high-speed counter monitor screen is valid for the
subsequent presets, unless it is set again in the sequence program.
• If the preset from the high-speed counter monitor screen and the preset by the sequence
program are executed simultaneously, the setting value by the sequence program may be
preset.
3) 3)
8.4 Operation of Each Intelligent Module Monitor Screen
1) 2)
4)
8
8 - 27