Mitsubishi Electric GOT2000 Series User Manual page 206

[Com Status]
[Causes of Ssp]
[Causes of Stop]
4) [Constant LS]
The following shows the display items.
[Constant LS]
5) [LoopBK Info]
The following shows the display items.
[FLoop]
[RLoop]
[FLoop Back Station]
[RLoop Back Station]
[# of Loop Switching]
6) [TsSt' Sta]
The following shows the display items.
[Parameter Setting]
[Reserved Sta]
[Communication Mode]
[Transmission Mode]
[Transmission Stat]
6 - 18
6.4 Operation Procedures
Item
Shows the current communications status of the host.
• [D-Link in prog]
• [D-Link Stop (A)]
• [D-Link Stop (H)]
• [B-Pass excut]
• [Disconnection]
• [Loop test]
• [Set Conf. test]
• [Sta Odr. Conf.]
• [Com. test]
• [Offline test]
• [Reset. in prgr.]
Indicates the causes why the communications were interrupted.
This indicates "Normal" if communications are normal.
• [Normal]
• [Offline]
• [Offline Test]
• [Line error]
• [Disconnection]
• [Initialize]
• [Others (error codes)]
Indicates the causes why the data link was stopped.
This indicates "Normal" if communications are normal.
• [Stop disignat]
• [No common para]
• [Host Para error]
• [Host CPU error]
• [Com. suspension]
• [Others (error codes)]
Item
Indicates the predetermined time of constant link scans.
Item
Shows the status of the forward loop lines of the host.
• [Normal]
• [LoopBK Trans]
• [D-Link Impo]
Shows the status of the reverse loop lines of the host.
• [Normal]
• [LoopBK Trans]
• [D-Link Impo]
Indicates the station number of a station that executes the loopback along the forward loop.
Displays "---" when the loopback is operating normally.
Indicates the station number of a station that executes the loopback along the reverse loop.
Displays "---" when the loopback is operating normally.
Indicates the cumulative number of times for which loops have been switched.
"---" is displayed when coaxial bus connections are established.
Item
Displays [Common Param], [Common+Specif], [Default Param], or [Default+Specif].
Indicates the availability of a reserved station. (Have/None)
Indicates either "Normal mode" or "Constant LS."
Indicates either "Normal Trans" or "Multiple Trans."
"---" is displayed when coaxial bus connections are established.
Indicates either "Normal Trans" or "Multiple Trans.
"---" is displayed when coaxial bus connections are established.
Description
Description
Description
Description