Mitsubishi Electric GOT2000 Series User Manual page 209

4) [Constant LS]
The following shows the display items.
Item
[Constant LS]
5) [LoopBK Info]
The following shows the display items.
Item
[FLoop]
[RLoop]
[FLoop Back Station]
[RLoop Back Station]
[# of Loop Switching]
"---" is displayed when coaxial bus connections are established.
6) [TsSt' Sta]
The following shows the display items.
Item
[Parameter Setting]
[Reserved Sta]
[Communication Mode]
[Transmission Mode]
[Transmission Stat]
(2) Key functions
The following shows the functions of the keys that are used for the operations on the detailed monitor screen.
1) [RET] key
Returns to the line monitor.
2) [END] key
Exits the detailed monitor and returns to the screen where the network monitor function was started.
Indicates the predetermined time of constant link scans.
Shows the status of the forward loop lines of the host.
• [Normal]
• [LoopBK Trans]
• [D-Link Impo]
Shows the status of the reverse loop lines of the host.
• [Normal]
• [LoopBK Trans]
• [D-Link Impo]
Indicates the station number of a station that executes the loopback along the forward loop.
Displays "---" when the loopback is operating normally.
Indicates the station number of a station that executes the loopback along the reverse loop.
Displays "---" when the loopback is operating normally.
Indicates the cumulative number of times for which loops have been switched.
"---" is displayed.
Indicates the availability of a reserved station. (Have/None)
Indicates either "Normal mode" or "Constant LS."
Indicates either "Normal Trans" or "Multiple Trans."
"---" is displayed when coaxial bus connections are established.
Indicates either "Normal Trans" or "Multiple Trans."
"---" is displayed when coaxial bus connections are established.
Description
Description
Description
1)
2)
6.4 Operation Procedures
6
6 - 21