Mitsubishi Electric GOT2000 Series User Manual page 214

■5. Display contents and keys functions when monitoring CC-Link IE controller network
This section describes the screen configuration of the detailed monitor and the functions of on-screen keys when the
GOT monitors a control station or normal station on the CC-Link IE controller network set as the host station.
(1) Displayed contents
1) [TsSt' Info]
The following shows the display items.
[This Station's#]
[NetWork#]
[Group#]
2) [CtrlSt Info]
The following shows the display items.
[Spc Ctrl Sta]
[Curr Ctrl Sta]
[Com Info]
[SubCtrl Sta Com]
[RmtI/OMstSta]
3) [D-Link Info]
The following shows the display items.
[Total of L-Sta]
[Largest Nrm Sta]
[Largest DL-Sta]
[Com Status]
[Cause of Ssp]
6 - 26
6.4 Operation Procedures
1)
2)
3)
Item
Displays the host station number.
Displays the network number of the host station.
Displays the group number.
Item
Displays the station number set as the control station.
Displays the station number of the station currently operating as the control station.
Displays whether the GOT communicates with the control station or sub-control station.
[---] is displayed.
Displays the station numbers of the I/O master stations for block 1 and block 2.
[None] is displayed with no setting.
Item
Displays the total number of stations on the monitored network set for common parameters.
Displays the maximum station number of the station communicating normally.
Displays the maximum station number of the station performing a data link.
Displays the current communication status of the host station.
• [D-Link in prog.]
• [D-Link stopped]
• [B-Pass excut]
• [B-Pass stopped]
• [Offline test]
• [Offline]
Displays the reason for the interrupted communication.
[Normal Comm] is displayed with normal communications.
• [Cable disconnct]
• [Wrong cable]
• [Checking cables]
• [Disconnct/retrn]
• [Offline mode]
• [Offline test]
• [Self-check mode]
4)
5)
6)
Description
Description
Description