Mitsubishi Electric GOT2000 Series User Manual page 36

■2. Connection type
This function can be used in the following connection types.
○: Available, ×: Unavailable
Function
Name Description
Displaying
the status of
modules
Starting
System
extended
launcher
functions
Online
module
change
*1
■3. Required system application (extended function)
For the system application (extended function) required, refer to the following.
➠
(1) System application (extended function)
Write the package data that contains the system application (extended function) for the system launcher to the GOT.
To use an extended function compatible with the system launcher, write the package data that contains the
corresponding system application (extended function) to the GOT.
For the communication method with the GOT, refer to the following.
➠
(2) System application (extended function) size
To install a system application (extended function) to the GOT, enough space in the user area is required.
For information on how to check the available space of the user area and each data size, refer to the following.
➠
■4. Extended function compatible with the system launcher
The following table shows the extended functions that can be started from the system launcher.
Device monitor
Sequence program monitor (Ladder)
Sequence program monitor (SFC)
Network monitor
Q motion monitor
Intelligent module monitor
*1
Backup/restoration
Motion SFC monitor
CNC monitor
CNC data I/O
CNC machining program edit
iQSS utility
Drive recorder
*1
2 - 2
2.2 Specifications
Direct CPU
Bus
connection
*1
connection
(Serial)
○ ○
The LCPU does not support the connection type.
1.2 System Applications (Extended Functions) Required for Each Function
GT Designer3 (GOT2000) Screen Design Manual
GT Designer3 (GOT2000) Screen Design Manual
The CPU number setting is not transferred. Only the channel of the connected controller is in its selected state.
Connection type between the GOT and controller
Ethernet
connection
Serial
(using
communication
Ethernet
connection
port built in
the CPU)
○ ○
Extended function
Ethernet
MELSECNET/H
connection
connection,
(using
MELSECNET/
Ethernet
10 connection
module)
○ ○
CC-Link IE CC-Link
Controller connection
connection,
CC-Link IE
ID G4
Field
connection
○ ○ ○