Operations Of Display - Mitsubishi Electric GOT2000 Series User Manual

9.3

Operations of Display

This section explains how to display the servo amplifier monitor screen after the GOT is turned on.
Step 1.
Turn on the power to the GOT.
Step 2.
Display the servo amplifier monitor screen by one of the following methods.
• Starting from the special function switch (Servo Amplifier Monitor) set in the project data
For information on how to set special function switches, refer to the following.
➠
• Starting from the utility
In the utility, touch [Monitor] → [Servo amplifier monitor] from the main menu.
For information on how to display the utility, refer to the following.
➠
Step 3.
Set the channel number.
Set the channel number of the servo amplifier connected to the GOT.
After the GOT is turned on, the communication setting window is displayed automatically only at the first
startup of the servo amplifier monitor.
To display the communication setting window after the first startup, touch the [Ch: ] key on the servo
amplifier monitor screen.
➠
Step 4.
Set the model of the servo amplifier to be monitored and other items.
Step 5.
Select a function of the servo amplifier monitor.
9 - 8
9.3 Operations of Display
GT Designer3 (GOT2000) Screen Design Manual
GOT2000 Series User's Manual (Utility)
9.4 Operations of Servo Amplifier Monitor Screens
Communication setting window