Mitsubishi Electric GOT2000 Series User Manual page 260

■3. Parameter setting operation
As an example of the parameter setting operation, the following describes how to change the setting of [Auto tuning].
Step 1.
Select the item whose parameter is to be set with the item selection keys, and touch the [CHG] key.
Step 2.
In the parameter setting window, enter the parameter setting with the key window.
Touch the [Enter] key to confirm the setting.
To cancel the parameter setting operation, touch the [×] key at the top right of the screen to close the
parameter setting window.
Step 3.
As the confirmation window appears, touch the [OK] key to write the parameter setting to the motion
controller CPU.
To cancel writing of the parameter setting, touch the [Cancel] key.
Step 4.
After writing is completed, the parameter setting screen whose display has been updated to the new
parameter setting is displayed.
7 - 28
7.4 Operation Procedures