Mitsubishi Electric GOT2000 Series User Manual page 252

(2) Key functions
The following shows the functions of the keys that are used for the operations on the error list designated-axis
screen.
1)
6) 7)
In the real mode or the advanced synchronous control mode
1) [1Ax] key
Switches the axes to be monitored.
This item is available only in the real mode.
2) [Out Module 1Ax] key, [Virt. Axis 1Ax] key, [Sync. Enco. 1Ax] key,
Switches the axes to be monitored.
These items are available only in the virtual mode.
3) [RET] key
Returns to the previous screen.
4) [Mon. Menu] key
Returns to the monitor menu screen.
5) [END] key
Exits the Error List Designated-Axis monitor screen and returns to the screen where the Q motion monitor was
started.
6) [Print Screen] key
Stores the displayed screen to the SD card in the BMP or JPEG format.
For further information about hard copies, refer to the following:
➠
7) [Cancel Print]
The touch operation of this key is invalid.
7 - 20
7.4 Operation Procedures
3)
7.4.12 Hard copy output
4) 5)
2)
2)
2)
6) 7)
In virtual mode
3) 4) 5)