Specifications; System Configuration; Access Range; Precautions - Mitsubishi Electric GOT2000 Series User Manual

20.2 Specifications

➠
20.2.1

System configuration

This section describes the GOTs that support the CNC monitor 2, the target controllers, and the connection types between
the GOT and the controller.
For connection type settings, precautions regarding the communication unit/cable, and connection type, refer to the
following.
➠
■1. GOT
The CNC monitor 2 is available on GT27-X, GT27-S, and GT25-S.
■2. Target controller
Controller
CNC C80 (R16NCCPU)
■3. Connection type
This function can be used in the following connection types.
Name
CNC monitor 2
■4. Required system application (extended function)
For the system application (extended function) required, refer to the following.
➠
(1) System application (extended function)
Write the package data that contains the system application (extended function) for the CNC monitor 2 to the GOT.
For the communication method with the GOT, refer to the following.
➠
(2) Space for the system application (Extended function)
To install a system application (extended function) to the GOT, enough space in the user area is required.
For information on how to check the available space of the user area and each data size, refer to the following.
➠
■5. Applicable hardware
Hardware
USB keyboard and USB mouse
20 - 2
20.2 Specifications
20.2.1 System configuration

20.2.2 Access range

20.2.3 Precautions

GOT2000 Series Connection Manual (Mitsubishi Products) For GT Works3 Version1
Function
Description
Operates and monitors CNC C80, inputs and outputs data,
and edits machining programs.
1.2 System Applications (Extended Functions) Required for Each Function
GT Designer3 (GOT2000) Screen Design Manual
GT Designer3 (GOT2000) Screen Design Manual
○: Available, ×: Unavailable
Connection type between the GOT and CNC C80
Ethernet connection
○