23.4.6
[Select channel] window
Select a channel.
1) Channel key
Confirms the channel selection, and switches the window to the [Select station] window.
23.4.7
[Select station] window
Select a network number and station number from the connection history.
1) History key
Confirms the selection of the network number and station number, and establishes communication with the
target servo amplifier.
The history keys of the last three connections are displayed.
2) [Input station number] key
Switches the window to the [Input station No.] window.
Set a network number and a station number.
➠
23.4.8 [Input station No.] window
23.4.8
[Input station No.] window
Set a network number and a station number.
1) [N/WNo.]
Switches the window to the [Input N/W No.] window.
Set a network number.
➠
23.4.9 [Input N/W No.] window
2) [PCNo.]
Switches the window to the [Input PLC No.] window.
Set a PLC station number.
➠
23.4.10 [Input PLC No.] window
3) [CPUNo.]
CPU number
This number cannot be changed.
4) [OK] key
Confirms the entry of the network number and PLC station number, and establishes communication with the
target servo amplifier.
1)
1)
2)
2)
1)
23.4 [Drive recorder information list] screen
3)
4)
23
23 - 13