Operating Procedure; Cnc Monitor 2 Screen Layout - Mitsubishi Electric GOT2000 Series User Manual

20.4 Operating Procedure

This section describes the CNC monitor 2 screen layout, data input, authorization acquisition, and CNC C80 parameters.
20.4.1

CNC monitor 2 screen layout

The following describes the display data of the CNC monitor 2 screen and the functions of the keys displayed on the screen.
1) Connected CNC C80
Displays the network No., PLC No., and module name of the connected CNC C80.
The module name depends on the parameter setting of the CNC C80.
For the details of CNC C80 parameters, refer to the manual of the CNC C80.
2) Message display area
Displays messages.
For the details of messages, refer to the following.
➠ 20.5 Error Messages and Corrective Actions
3) Select channel key
Displays the selected channel number.
Touch this key to display the communication setting window.
When a CNC C80 is connected, touching this key disconnects the CNC C80.
4) [CNC Chg] key
Switches between the CNC C80 modules in the order set in [Ethernet Setting].
5) [Rtn] key
Returns to the utility or user-created screen.
6) Monitor screen
Displays the operation, setup, edit, diagnosis, or maintenance screen of the CNC C80.
Touch this screen to switch the screen.
The display language depends on the parameter setting of CNC C80.
For the details of CNC C80 parameters, refer to the manual of the CNC C80.
7) Software keyboard
Touch a key to send a key code to the CNC C80.
For the details of the software keyboard, refer to the following.
➠ 20.4.2 ■1. Using the software keyboard
A key code can be sent with the USB keyboard.
For information on how to input a key code with the USB keyboard, refer to the following.
➠ 20.4.2 ■2. Using a USB keyboard
2)
1)
6)
7)
3) 4) 5)
7)
20.4 Operating Procedure
20
20 - 7