At Alarm Occurrence)] Screen - Mitsubishi Electric GOT2000 Series User Manual

4) Cursor movement keys
Move the cursors with the distance between cursor A and cursor B unchanged.
To continue moving the cursors, touch and hold a cursor movement key.
The cursor movement keys do not appear when the zoom in mode or the move mode is enabled.
To change the distance between cursor A and cursor B, touch the [Tools] key.

23.6 [(At alarm occurrence)] screen

This screen lists the data that was collected at the occurrence of an alarm.
1) Alarm information
Displays the information on the selected alarm.
When data is read from a servo amplifier, an alarm number is displayed.
When data is read from a file, the name of the file is displayed.
2) [Open] key
Displays the [Open] window.
Open a drive recorder information file.
➠
23.4.1 [Open] window
3) [Save] key
Displays the [File storage destination] window.
Save the data in a file.
➠ 23.4.3 [File storage destination] window
Data read from a file cannot be saved.
4) [Waveform] key
Switches the screen to the [Graph waveform] screen.
➠
23.5 [Graph waveform] screen
This key is disabled when data is read from a file.
5) [Recorder info.] key
Switches the screen to the [Drive recorder information list] screen.
➠
23.4 [Drive recorder information list] screen
6) Alarm detail information
[No.]
[Occurred]
[Detail]
[Axis]
[Name]
1)
2)
6)
7)
Item
Alarm number
Time between the instant when the monitored servo amplifier starts operating and the instant
when an alarm occurs
Alarm detail number
Number of the axis from which data is read
When data is read from a file, [-] is displayed.
Alarm name
3) 4) 5)
Description
23.6 [(At alarm occurrence)] screen
8)
9)
8)
23 - 27
23