Mitsubishi Electric GOT2000 Series User Manual page 72

■2. Ending the test mode
To end the test mode, touch the [Test] key.
■3. Dialogs for setting the device value
The display contents of the dialogs for setting the device value differ depending on the device display format.
For decimal number
1)
2)
6) 7)
1) Device value display area
Set the device value to be input.
2) Device value input key
Use this key to input the device value.
3) [×] key
Closes the window for entering the device.
4) [DEX/HEX] key
Switches the key type between the decimal and hexadecimal.
5) [FIX/EXP] key
Switches the display format of the device value display area between the exponential representation (EXP) and
the floating point representation (FIX).
6) [+/-] key
Switches positive and negative of the input value.
7) [Enter] key
Determines the device input area input in the device value display area.
8) [Del] key
Deletes an input value or character.
9) [AC] key
Deletes all the input values and characters.
3 - 28
3.3 Operations Common to the Monitor Screens
[Test] key
For binary or hexadecimal number
3)
1)
4)
2)
8)
9)
For real number
3)
1)
4)
2)
7) 8) 9)
3)
5)
8)
6) 7) 9)