Mitsubishi Electric GOT2000 Series User Manual page 11
Graphic operation terminal
Hide thumbs
Also See for GOT2000 Series:
- Connection manual (1224 pages) ,
- User manual (634 pages) ,
- Hardware user manual (438 pages)
Table of Contents
Advertisement
[PRECAUTIONS WHEN THE DATA STORAGE IS IN USE]
If the SD card is removed from drive A of the GOT while being accessed by the GOT, the GOT may
stop processing data for about 20 seconds.
The GOT cannot be operated during this period.
The functions that run in the background including a screen updating, alarm, logging, scripts, and
others are also interrupted.
Remove the SD card after checking the following items.
• GT27,GT25,GT23
After checking the light off of SD card access LED, remove the SD card.
• GT21
After disabling SD card access on the utility screen of the GOT and checking that the SD card
access LED is off, remove the SD card.
If the data storage is removed from the GOT while being accessed by the GOT, the data storage and
files may be damaged.
Before removing the data storage from the GOT, check the SD card access LED, system signal, or
others to make sure that the data storage is not accessed.
Turning off the GOT while it accesses the SD card results in damage to the SD card and files.
When using the GOT with an SD card inserted, check the following items.
• GT27,GT25,GT23
When inserting a SD card into the GOT, make sure to close the SD card cover.
Failure to do so causes the data not to be read or written.
• GT21
When using an SD card connected to the SD card unit or the GOT, enable the SD card access in
the GOT utility in advance.
Failure to do so causes the data not to be read or written.
When removing the SD card from the GOT, make sure to support the SD card by hand as it may pop
out.
Failure to do so may cause the SD card to drop from the GOT, resulting in a failure or break.
When inserting a USB device into a USB interface of the GOT, make sure to insert the device into
the interface firmly.
Failure to do so may cause the USB device to drop from the GOT, resulting in a failure or break.
Before removing the USB device from the GOT, follow the procedure for removal on the utility screen
of the GOT.
After the successful completion dialog is displayed, remove the USB device by hand carefully.
Failure to do so may cause the USB device to drop from the GOT, resulting in a failure or break.
WARNING
CAUTION
A - 9
Advertisement
Table of Contents
