2.4
Operating Procedure
This section explains screen operations for the system launcher.
The display screen of the system launcher differs depending on the GOT used.
➠
2.4.1
System configuration screen
This section explains the structure of the screen and the common operations when the system launcher is executed.
■1. Display contents and key functions
The following explains the structure of the system configuration screen and the function of the keys displayed on the
screen after the system launcher is started.
(1) Displayed contents
1) Module status display
Displays the information about [CPU No.], [Model], [Points], and [Start I/O] of the modules.
2) Touch key
The keys used for the operations on the system configuration screen
3) Message display
If communication with the connected PLC cannot be established, [Communication error] appears.
4) [Total num of bases]
The number of base units displayed in the system configuration diagram.
When the monitoring target is the LCPU, [Total num of blocks] is displayed.
2 - 6
2.4 Operating Procedure
2.4.1 System configuration screen
2.4.2 Online module change screen
1)
2)
2)
3)
2)
2)
4)