4) [Print Screen] key
Stores the displayed screen to the SD card in the BMP or JPEG format.
For further information about hard copies, refer to the following:
➠
9.4.8 Hard copy output
5) [Cancel Print] key
The touch operation of this key is invalid.
■3. Function device display screen
The following describes the display data of the function device display screen and the key functions displayed on the
screen.
(1) Displayed contents
1)
1) [Input Function], [Output Function]
Displays the ON or OFF status for each I/O signal.
(2) Key functions
The table below shows the functions of the keys that are used for the operations of the function device display
screen.
3)
5)
4)
1) [Menu] key
Returns to the function selection menu screen.
2) [End] key
Exits the servo amplifier monitor.
1)
1)
2)
3)
4)
9.4 Operations of Servo Amplifier Monitor Screens
When MR-J2S-
□
CP is monitored
When MR-J2S-
□
CP is monitored
5)
9
1)
2)
9 - 21