Mitsubishi Electric GOT2000 Series User Manual page 215

Item
[Cause of Ssp]
[Cause of Stop]
4) [Constant LS]
The following shows the display items.
Item
[Constant LS]
5) [LoopBK Info]
The following shows the display items.
Item
[OUT Loop]
[IN Loop]
[OUT Loop Back Sta.]
[IN Loop Back Sta.]
[#of Loop Switching]
6) [TsSt' Sta]
The following shows the display items.
Item
[Parameter Setting]
[Reserved Sta]
[Communication Mode]
[Transmission Mode]
[Transmission Stat]
Displays the reason for the interrupted communication.
[Normal Comm] is displayed with normal communications.
• [Cable disconnct]
• [Wrong cable]
• [Checking cables]
• [Disconnct/retrn]
• [Offline mode]
• [Offline test]
• [Self-check mode]
When the station is in the hardware test mode, self-loopback test mode, circuit test mode, or
station-to-station test mode, [Offline test] is displayed.
Displays the reason for the interrupted data link.
[Normal] is displayed with normal data links.
• [Stop disignat]
• [D-Link time up]
• [Testing line]
• [Param not rcvd]
• [ Invlid Host No.]
• [Set Rsvd Sta.]
• [Dup Host No.]
• [Dup CtrlSta No.]
• [Sta No. not set]
• [Invlid NTWK No.]
• [Host Para error]
• [Params in comm.]
• [CPU stop error]
• [CPU pwr stp err]
Displays the set contact link scan time.
Displays the OUT-side loop line status of the host station.
• [Normal]
• [LoopBK Trans]
• [All Sta. NG]
Displays the IN-side loop line status of the host station.
• [Normal]
• [LoopBK Trans]
• [All Sta. NG]
Displays the station number of the OUT-side loopback station.
[---] is displayed with normal loopbacks.
Displays the station number of the IN-side loopback station.
[---] is displayed with normal loopbacks.
Displays the accumulated number of switching loops.
Displays [No parameters], [Common Param], [Unique param], or [Common+unique].
Displays whether a reserved station exists or not.
Displays [Normal Mode] or [Constant LS].
[---] is displayed.
[---] is displayed.
Description
Description
Description
Description
6.4 Operation Procedures
6
6 - 27