How To Use Backup Data Conversion Tool - Mitsubishi Electric GOT2000 Series User Manual
Graphic operation terminal
Hide thumbs
Also See for GOT2000 Series:
- Connection manual (1224 pages) ,
- User manual (634 pages) ,
- Hardware user manual (438 pages)
Table of Contents
Advertisement
10.5.3
How to use Backup Data Conversion Tool
■1. Setting items
The following shows the setting items of Backup Data Conversion Tool.
Item
Conversion Target
Backup Data Folder
Target Drive
Workspace Drive Setting
Drive Name
Folder to be assigned to a
workspace drive
[Drive Assignment]
[Drive Release]
[Import (GOT → GX Developer)]
[Export (GX Developer → GOT)]
[End]
*1
10 - 52
10.5 Backup Data Conversion Tool
Specify data to be converted.
Specify the storage location of the backup data (setting data: UNITINFO.G2B) created
*1
with the backup/restoration function by clicking the [Browse] button.
Select the PLC drive that has setting data to be converted.
Configure the settings for performing edits on GX Works2 or GX Developer.
Specify the IC memory card drive to be set for the IC memory card reading/writing on GX
Works2 or GX Developer.
Specify the target folder of [Drive Name] by clicking the [Ref.] button.
*1
Click the item, and then [Folder to be assigned to a workspace drive] is assigned to [Drive
Name].
([Folder to be assigned to a workspace drive] is automatically assigned to [Drive Name]
normally. Use the button when the drive assignment setting is canceled by clicking the
[Drive Release] button and a drive is assigned again.)
Click the item, and then the drive assignment setting is canceled.
Converts the backup data into the file format editable with GX Works2 or GX Developer.
Converts the backup data edited with GX Works2 or GX Developer into the file format
applicable to the backup/restoration function.
Ends Backup Data Conversion Tool.
The GOT recognizes the file location with a path as shown below.
Set the folder and file names so that the total number of characters in the path is within 78 characters.
The user can set the folder name and file name only.
(Other than the folder and file names are automatically set.)
Example) Path of QPG file to be stored in memory card
A :\
Folder name
(2 characters)
Drive name
(1 character)
Description
\
File name
(1 character)
Max. 78 characters
.QPG
Extension
(4 characters)
Advertisement
Table of Contents
