Mitsubishi Electric GOT2000 Series User Manual page 192

(2) When the GOT is connected to a QCPU (Q mode), motion controller (Q series), QnACPU, or
motion controller (A series)
○: Available, ×: Unavailable
Function
Name Description
Monitors the statuses of
the following networks.
• MELSECNET/H
network
• MELSECNET/10
Network network
monitor • MELSECNET(II)
network
• CC-Link IE controller
network
• CC-Link IE field
network
*1
*2
*3
*4
*5
*6
(3) When the GOT is connected to an ACPU/QCPU (A mode)
○: Available, ×: Unavailable
Function
Name
Monitors the statuses of the
following networks.
• MELSECNET/H network
Network
• MELSECNET/10 network
monitor
• MELSECNET(II) network
• CC-Link IE controller network
• CC-Link IE field network
*1
*2
*3
■3. Required system application (extended function)
For the system application (extended function) required, refer to the following.
➠
(1) System application (extended function)
Write the package data that contains the system application (extended function) for the sequence program monitor
(SFC) to the GOT.
For the communication method with the GOT, refer to the following.
➠
(2) System application (extended function) size
To install a system application (extended function) to the GOT, enough space in the user area is required.
For information on how to check the available space of the user area and each data size, refer to the following.
➠
6 - 4
6.2 Specifications
Bus
connection
○
Indicates the CC-Link IE controller network connection.
Indicates CC-Link IE field network connection.
Indicates CC-Link connection (Intelligent device station).
Indicates CC-Link connection (via G4).
When the GOT is connected to the MELSECNET/H or MELSECNET/10, use a QCPU and a network module (QJ71LP21,
QJ71LP21-25, QJ71LP21S-25, QJ71LP21G, or QJ71BR11) of function version B or a later version.
Network monitor cannot be used when using CC-Link IE field network Ethernet adapter.
Description
connection
Indicates CC-Link connection (Intelligent device station).
Indicates CC-Link connection (via G4).
Monitoring is not possible when the target CPU is AnUCPU and a MELSECNET/10 network module is used.
1.2 System Applications (Extended Functions) Required for Each Function
GT Designer3 (GOT2000) Screen Design Manual
GT Designer3 (GOT2000) Screen Design Manual
Connection type between GOT and controller
Serial
Direct CPU
communication
connection
connection
○ ○
Connection type between GOT and controller
Computer
Bus Direct CPU
link
connection
connection
○ ○
○
MELSEC
NET/H
Ethernet connection,
MELSEC
*6
connection
CC-Link IE field
NET/10
*5
connection
*4
○
○
Ethernet MELSECNET/10
*6
connection connection
*3
○
CC-Link
CC-Link IE
connection
controller
*1
connection ,
*3 *4
ID G4
*2
connection
○ ○ ○
CC-Link
connection
*5
*1 *2
ID G4
○ ○ ○