Mitsubishi Electric GOT2000 Series User Manual page 179

2) [Comment Display in Zoom Window]
Sets the zoom comment display mode.
Touching the key in the zoom comment display mode cancels the zoom comment display mode.
➠
5.3.3 ■3. Setting zoom comment display mode
3) [Comment change]
Displays the comment file list window.
➠
5.6.3 ■2. (1) Comment file list window
4) [Automatic Scroll]
Sets the automatic scroll mode.
Touching the key in the automatic scroll mode cancels the automatic scroll mode.
➠ 5.3.3 ■5. Setting automatic scroll mode
5) [Active Step List]
Displays the active step list window.
➠
5.6.3 ■2. (2) Active step list window
6) [Active Block List]
Displays the active block list window.
➠
5.6.3 ■2. (3) Active block list window
7) [Program List]
Displays the program list window.
➠ 5.4.1 ■4. Program list window
8) [PLC Read]
Displays the PLC read screen.
➠
5.4 How to Operate PLC Read Screen
9) [Ladder Monitor]
Starts the sequence program monitor (ladder).
Touching the key with a device selected can automatically search for the device with the sequence program
monitor (ladder).
For the automatic search with the sequence program monitor (ladder), settings for automatically reading
sequence programs are required.
For settings for automatically reading sequence programs, refer to the following.
• When setting with GOT utility
➠ GOT2000 Series User's Manual (Utility)
• When setting with GT Designer3 (GOT2000)
➠
GT Designer3 (GOT2000) Screen Design Manual
5.6 How to Operate SFC Diagram Monitor Screen
5
5 - 29