Mitsubishi Electric GOT2000 Series User Manual page 64

■2. Communication setting dialog
Configure the communication setting with the monitor target when starting monitor in this dialog.
(1) Screen display
1)
3)
1) CH No. input area
Set the CH No. for the target controller.
The setting range is [1] to [4].
2) Network No. input area
Set the network No. for the target controller.
The setting range differs depending on the connection type.
• Bus connection, direct CPU connection, serial communication connection: [0]
• Ethernet connection: [1] to [239]
• MELSECNET/H, MELSECNET/10: [0] (host loop), [1] to [255] (specified loop)
• CC-Link IE Controller Network connection: [1] to [239]
• CC-Link IE Field Network: [1] to [239]
• CC-Link (ID/G4) connection: [0]
3) Station No. input area
Set the station No. of the target controller.
When the station No. is set to the host station (FF), set the network No. to 0.
The setting range differs depending on the connection type.
• Bus connection, direct CPU connection, serial communication connection: [FF] (host station)
• Ethernet connection: [1] to [64]
• MELSECNET/H, MELSECNET/10: [0] (control station), [1] to [64] (normal station)
• CC-Link IE Controller Network connection: [1] to [120]
• CC-Link IE Field Network connection: [0] (master station), [1] to [120] (local station)
• CC-Link (ID/G4) connection: [0] (master station), [1] to [64] (local station)
4) CPU No. input area
Set the CPU No. of the multiple CPUs.
This setting can be configured only the multiple CPUs are monitored.
The setting range is [1] to [4].
5) CH No. selection key
Select the CH No. for connecting the monitor target.
6) Keys
Keys for operations in the communication setting window are displayed.
3 - 20
3.3 Operations Common to the Monitor Screens
When the CH No. is input
2)
1)
3)
4)
5)
When the network No., station No.,
and CPU No. are input
2)
4)
6)