15.4 Operation Procedures
This section describes the contents of the MELSEC-FX list editor and the key functions displayed on the screen.
15.4.1
Key arrangement and a list of key functions
The arrangement and functions of the keys displayed on the MELSEC-FX List Editor window are described below.
■1. Displayed contents
1)
3)
No.
Item
Displays the currently selected channel number.
Touching "ChNo." displays the communication setting window.
1)
Channel No.
The communication setting window is not displayed if the MELSEC-FX list editor is started from the FX
ladder monitor.
Displays a mode for MELSEC-FX list editor.
➠
2)
Mode
[Monitor] is displayed when the list monitor is executed.
➠
Displays the contents of errors that occur with the MELSEC-FX list editor.
3)
Error message
➠
Displays the sequence program in list format (12 digits).
4)
List display area
The position (line) that can be edited is displayed with a bar.
5)
Key area
Displays the keys that can be used with the MELSEC-FX list editor.
4)
15.4.2 Selection and operation of modes
15.4.12 List monitor
15.5 Error Messages and Corrective Actions
2)
5)
Description
15.4 Operation Procedures
15
15 - 9