Access Range; Precautions - Mitsubishi Electric GOT2000 Series User Manual

■3. Required system application (extended function)
For the system application (extended function) required, refer to the following.
➠
1.2 System Applications (Extended Functions) Required for Each Function
(1) System application (extended function)
Write the package data that contains the system application (extended function) for the drive recorder to the GOT.
For the communication method with the GOT, refer to the following.
➠ GT Designer3 (GOT2000) Screen Design Manual
(2) System application (extended function) size
To install a system application (extended function) to the GOT, enough space in the user area is required.
For information on how to check the available space of the user area and each data size, refer to the following.
➠ GT Designer3 (GOT2000) Screen Design Manual
■4. Required hardware
Data storage is required for the following operations.
• Saving the data read from a servo amplifier in a file
• Displaying the data of a file that is read from the data storage
23.2.2

Access range

The access range is the same as when the GOT is connected to a controller.
For the details of the access range, refer to the following.
➠
GOT2000 Series Connection Manual (Mitsubishi Products) For GT Works3 Version1
23.2.3

Precautions

■1. Sending commands from pieces of equipment
Do not send commands from pieces of equipment to one servo amplifier simultaneously.
Doing so may cause the servo amplifier to exhibit unintended behavior.
23.2 Specifications
23
23 - 3