Data Setting - Mitsubishi Electric F930GOT-BWD-E User Manual

Graphic Operation Terminal F930GOT
9.5.7

Data Setting

The "Data Setting" object displays automatically the ten- or sixteen-key pad (keyboard) and
allows to change the set value or the current value of a specified word device when a specified
touch key is pressed.
Because the key pad is displayed only when it is required, the screen can be used efficiently.
The "Data Setting" object is called the keyboard call type. The "Keyboard" object described
later is called the keyboard resident type. These objects can be used in accordance with the
situation.
u u u u Contents of setting
Attribute
Control Input
User ID
Position
Keyboard Type
1) Position
Enter the X and Y coordinates of the start point from which the keyboard is displayed.
2) Keyboard Type
123.56
CHANGED DATA
3) User ID
Enter the ID No. of the "Number" or "Ascii" object whose data is to be changed. The object
having this ID can now be changed.
n n n n Important point
Data change
The data can be changed without using the "Data Setting" function. When the displayed "Num-
ber" or "Ascii" object is touched, the ten-key pad is displayed to enable data change. (Refer to
Paragraph 3.3.)
Enter a key which displays the keyboard.
Enter the user ID of an object whose data is to be changed.
Enter the keyboard display position.
Enter the keyboard type.
7 8 9 CLR
4 5 6
1 2 3
0 - ENT
Creation of Display Screens (FX-PCS-DU/WIN-E) 9
Contents of setting
ß3)
ß2)
ß1)
9-51