Mitsubishi Electric GOT2000 Series User Manual page 254

(2) Key functions
The following shows the functions of the keys that are used for the operations on the positioning monitor screen.
1)
5) 6)
In the real mode or the advanced synchronous control mode
1) [Data Item 1Ax]
Changes the axes to be monitored.
2) [RET] key
Returns to the previous screen.
3) [Mon. Menu] key
Returns to the monitor menu screen.
4) [END] key
Exits the positioning monitor and returns to the screen where the Q motion monitor was started.
5) [Print Screen] key
Stores the displayed screen to the SD card in the BMP or JPEG format.
For further information about hard copies, refer to the following:
➠
6) [Cancel Print]
The operation of this key is invalid.
7 - 22
7.4 Operation Procedures
2)
7.4.12 Hard copy output
3) 4)
1)
5) 6)
In virtual mode
2) 3) 4)