Mitsubishi Electric GOT2000 Series User Manual page 553

Step 3.
Touch the [Area chg] key to switch the frame to the copy source target.
Step 4.
Touch the [Device] key of the copy source target to display the device selection window.
Step 5.
Select [CNC] in the device selection window.
Step 6.
Select the copy source file [1.PRG] in the list.
Step 7.
Touch the [Area chg] key to switch the frame to the copy destination target.
Step 8.
Touch the [Device] key to display the device selection window.
4. 4.
4.
5. 5. 5.
6. 6. 6.
3. 3. 3.
7. 7.
7.
18.4 Operation Procedures
18
18 - 9