Mitsubishi Electric GOT2000 Series User Manual page 132

(b) Key functions
[Apply changes]
■5. Online menu
Key
[PLC read]
[Write to PLC]
[Verify with PLC]
[PLC diagnosis]
[Remote operation]
[Write the program memory to
ROM]
[Start monitor]
4 - 44
4.7 How to Operate Ladder Editor Screen
Key
[X] Closes the Comment file list window.
Scrolls the display area up and down by one line.
Closes the Comment file list window and displays the ladder display area with the comments
of the file selected from the comment file list.
Displays the PLC read screen.
Checks the edited sequence program, and writes the program into the PLC
CPU.
Set the PLC CPU to the STOP status, and write the program into the PLC
CPU.
To execute the online change, execute it using the [Convert (Online change)]
in the [Convert] menu.
➠
4.7.3 ■3. Convert menu
Verifies the sequence program displayed on the ladder display area and the
program in the PLC CPU.
If the programs do not match, the Verify result window is displayed.
Displays the PLC diagnosis screen.
Displays the Remote operation window.
Displays the Copy program memory data into ROM window.
Displays the Ladder monitor screen.
Function
Function Reference section
4.5
-
(1)
(2)
(3)
(4)
4.6