Mitsubishi Electric GOT2000 Series User Manual page 591

Item
[OUT: LoopBK factor]
(3) Data link information
Item
[Com Status]
[Cause of Ssp]
[Cause of Stop]
(4) Transient status
Item
[Transmission Err]
[ErrCode]
(5) Link scan time information
Item
[Current LS time]
[Max. LS time]
[Min. LS time]
[Constant LS time]
Displays the loopback factor on the OUT side.
• [No LoopBK Sta.]
• [IN: cable disconnection]
• [IN: connecting a line]
• [IN: wrong cable connection]
Displays the communication (Data link) status of the host station.
• [D-Link in prog.]
• [D-Link stopped]
• [B-Pass exec]
• [B-Pass stopped]
• [Testing Offline]
• [Offline]
Displays the cause for which the communication (Transient transmission) of the host station is disabled.
• [Normal Comm]
• [Cable disconnection]
• [Wrong cable connection]
• [Checking cable IN/OUT]
• [Disconnecting/returning to system]
• [Offline]
• [Offline test]
• [Self-check mode]
Displays the cause for which the data link (Cyclic transmission) of the host station is disabled.
• [Normal Comm]
• [StopOrder]
• [D-Link observation timer time up]
• [Testing Line]
• [Param not rcvd]
• [Host out of range]
• [Host reservation]
• [Dup Host No.]
• [Dup CtrlSta]
• [Sta.No. not set]
• [Invalid Network No.]
• [Param Err]
• [Params in comm.]
• [CPU stop error]
• [CPU pwr stp err]
Displays the number of transient transmission errors.
A history of 16 errors is displayed in 16 rows, starting from the latest one.
Displays the current link scan time.
Displays the maximum link scan time.
Displays the minimum link scan time.
Displays the link scan time set in the parameter.
Description
Description
Description
Description
21.4 Display Contents
21
21 - 5