Specifications; System Configuration - Mitsubishi Electric GOT2000 Series User Manual

14.2 Specifications

14.2.1

System configuration

This section describes the system configuration of the motion SFC monitor.
For connection type settings and precautions regarding the communication unit/cable and connection type, refer to the
following.
➠
■1. Target controller
Error messages, error codes, and number of steps for errors that occur in the FX PLC can be checked.
Details can be checked immediately even for errors that occur during list editing.
Motion controller CPU(Q Series)
*1
*2
■2. Connection type
This function can be used in the following connection types.
(○: Applicable, ×: Inapplicable)
Function
Name Description
Motion Motion SFC
SFC program
monitor monitoring
*1
*2
*3
*4
■3. Required system application (extended function)
For the system application (extended function) required, refer to the following.
➠
(1) System application (extended function)
Write the package data that contains the system application (extended function) for the motion SFC monitor to the
GOT.
When testing the operation, write the package data, where the system application (extended function) for the device
monitor has been installed, to the GOT.
For the communication method with the GOT, refer to the following.
➠
(2) System application (extended function) size
To install a system application (extended function) to the GOT, enough space in the user area is required.
For information on how to check the available space of the user area and each data size, refer to the following.
➠
14 - 2
14.2 Specifications
GOT2000 Series Connection Manual (Mitsubishi Products) For GT Works3 Version1
*1*2
Use the following production number motion controller CPU when using the Q172CPU or Q173CPU.
• For bus connection and direct CPU connection
Q172CPU: Production number K******* or later
Q173CPU: Production number J******* or later
• For connections other than bus connection and direct CPU connection
Q172CPU: Production number N******* or later
Q173CPU: Production number M******* or later
The operation system software of SV13 and SV22 are available only.
Use a motion controller CPU with the following OS installed when using the Q172CPU, Q173CPU, Q172CPUN, or Q173CPUN.
• SW6RN-SV13Q□: 00H or later
(00E or later for using the Q172CPU or Q173CPU with the bus connection or direct CPU connection)
• SW6RN-SV22Q□: 00H or later
(00E or later for using the Q172CPU or Q173CPU with the bus connection or direct CPU connection)
Bus
connection connection
○
Indicates the CC-Link IE controller network connection.
Indicates CC-Link connection (Intelligent device station).
Indicates CC-Link connection (via G4).
Motion SFC monitor cannot be used when using CC-Link IE field network Ethernet adapter.
1.2 System Applications (Extended Functions) Required for Each Function
GT Designer3 (GOT2000) Screen Design Manual
GT Designer3 (GOT2000) Screen Design Manual
Controller
Connection type between GOT and controller
Serial
Direct communicati
connection
on
connection
○ ○
MELSECNET/H
Ethernet
connection,
MELSECNET/
*4
10
connection
○ ○
CC-Link
CC-Link
connection
IE
controller
*2 *3
ID G4
*1
○ ○ ○