Mitsubishi Electric GOT2000 Series User Manual page 570

[Delete] key
[MDI] key
[Refresh] key
■2. Edit screen
1) [Rtn] key
Exits the CNC machining program edit and returns to the monitor screen or the utility of the GOT.
2) CNC device name
The display contents differ according to the connection type.
• For bus connection
Displays the CPU number and module name.
• For Ethernet connection
Displays the station number and module name.
3) Software key board
Used to edit the program.
For details of the software key board, refer to the following.
➠
A key code can be sent with the USB keyboard.
For information on how to input a key code with the USB keyboard, refer to the following.
➠
4) Program name
Displays the name of the edited program.
The program name is displayed as MDI.PRG when an MDI program is edited.
5) System name display
Displays a system name when the MDI program is displayed and the MDI setting system can be switched.
6) Program comment
Displays the comment of the edited program.
No program comment is displayed for MDI programs.
The following program comments are not displayed correctly.
• A comment containing multibyte codes
• A comment containing Kanji, hiragana, katakana, or one-byte katakana
7) Editing mode
Indicates that the program is being edited.
This item appears only when the program is being edited.
19 - 6
19.4 Operation Procedures
Item
Deletes an existing machining program.
When a machining program is selected or a machining program name is input in the input
section and the [INPUT] key is touched, the confirmation dialog box is displayed.
Touch the [OK] key to delete an existing machining program.
Opens an MDI program.
The screen is switched to the edit screen to start the MDI program edit.
Updates and displays the program list.
4) 7) 5) 6)
11)
12)
13)
14)
15)
19.2.3 ■3. Software key board
19.2.3 ■4. Inputting characters using a USB keyboard
8) 9) 10)
Description
1)
2)
3)