Display - Mitsubishi Electric GOT2000 Series User Manual

13.3.1

Display

This subsection describes the procedure for reading the PLC to read the sequence program from the target controller when
the FX ladder monitor is executed, and until the FX ladder monitor screen is displayed.
Step 1.
Touch the [→], [←], [↑], and [↓] keys to specify the following items listed under "READ SECTION."
SETTING/NON SETTING for comment reading
POINT POINT POINT
Displaying the FX ladder monitor screen
The MELSEC-FX ladder monitor screen displays the sequence program that was executed when
the PLC was read. If any of the set values of the sequence program is changed, re-read the PLC.
Step 2.
Touch the [Keyword] key to enter the keyword registered in the target PLC CPU.
For the FX CPU keyword, refer to the following.
➠
GOT2000 Series User's Manual (Utility)
Utility display
procedure
PLC reading screen
When no keyword is registered
in the target controller
When a keyword is
registered in the
target controller
13.3 Operation for Display
13
13 - 7