Access Range; Precautions - Mitsubishi Electric GOT2000 Series User Manual

9.2.2

Access range

The access range is the same as the access range when the GOT is connected to a controller.
For details of the access range, refer to the following.
➠
GOT2000 Series Connection Manual (Mitsubishi Products) For GT Works3 Version1
9.2.3

Precautions

■1. Before using the servo amplifier monitor
Read the manual of the connected servo amplifier carefully and make sure you understand the contents before
performing servo amplifier monitoring.
■2. Test operation
Be sure to read the precautions listed below before performing a test operation.
➠
9.4.7 Test operations
■3. Time displayed on the servo amplifier monitor
If the time data of the GOT is incorrect, the time on the servo amplifier monitor will not be displayed correctly.
Refer to the following for the GOT clock data.
➠
GT Designer3 (GOT2000) Screen Design Manual
■4. Setting details
Use the same settings for the servo amplifier monitor on the GOT (Setup screen) and the servo amplifier.
➠ 9.4.2 Setup
If the settings are different, proper communications may not be performed.
■5. Servo amplifier monitored
One servo amplifier can be selected to be monitored among 32 servo amplifiers.
If multiple servo amplifiers are connected, select one servo amplifier to monitor.
■6. Background processing during parameter being input or output
While parameters are being input or output, do not monitor the devices of the servo amplifier parameters with any
function executing in the background. (Example: Device data transfer, logging, and recipe)
Data may not be written or read normally or a communication error may occur.
9.2 Specifications
9
9 - 7