Mitsubishi Electric GOT2000 Series User Manual page 67

Step 4.
When using the entry monitor, the window for entering the device is displayed successively.
After entering the device, close the dialog with the [×] key.
Entry device
■2. Window for entering the device
The display contents of the window for entering the device differ depending on the monitor category.
Entry monitor, batch monitor, and TC monitor
1)
3)
1) Device display area
Set a device to be entered when using the entry monitor, batch monitor, and TC monitor.
2) Memory address display area
Set the memory address to be entered when using the BM monitor.
3) Input keys for device and memory address
Use these keys to input a device or a memory address.
4) [×] key
Closes the window for entering the device.
5) Character type switch key
Switches the character type of the key.
• [a-z] key: Switches the character type to alphabetic characters (lowercase).
• [A-Z] key: Switches the character type to alphabetic characters (uppercase).
• [Sign] key: Switches the character type to symbol.
6) Input area move key
Moves the cursor among the input areas.
Use this key only when using the BM monitor.
7) [Enter] key
Enters the device input in the device display area or the memory address area.
8) [Del] key
Deletes an input value or character.
9) [AC] key
Deletes all the input values and characters.
[x] key
7)
9) 8)
3.3 Operations Common to the Monitor Screens
BM monitor
4)
2)
3)
5)
4)
6)
7) 8)
9)
3 - 23
3