Mitsubishi Electric GOT2000 Series User Manual page 560

Step 8.
The list is updated, and the SAMPLE01 directory is created.
When the directory creation is completed, a completion message is displayed.
(1) Inputting characters using a USB keyboard
When the key window is displayed, a USB keyboard can be used for key input.
For the corresponding keys, refer to the following.
Characters, numbers, symbols
Shift + Delete
Backspace
Delete
Esc
Enter
For how to set the USB keyboard, refer to the following.
➠
■6. Changing a file name when outputting the file
When a file is copied to the data storage, the file name in the copy destination can be changed.
The following describes the procedure for changing the file name at the file output.
Example)
Changing the machining program name [ALL.PRG] of [CNC] to [SAMPLE.PRG] and outputting the program to
[A:Standard SD card]
Step 1.
Touch the [Area chg] key to switch the frame to the copy destination target.
For the copy destination target, refer to the following.
➠
Set [A:Standard SD card] for the copy destination device.
18 - 16
18.4 Operation Procedures
Key
Press the key on the USB keyboard corresponding to the key displayed in the key window to
input it into the input value display area.
Deletes all characters in the input value display area.
Deletes one character to the left of the cursor in the input value display area.
Deletes one character to the right of the cursor in the input value display area.
Closes the key window without reflecting the values in the input value display area.
Closes the key window after reflecting the values in the input value display area.
GOT2000 Series User's Manual (Utility)
■2. Copy
Description