Mitsubishi Electric GOT2000 Series User Manual page 357

■9. Log files for backing up or restoring
When backing up or restoring, the controllers and files to be baked up or restored are recorded in log files (When
backing up or restoring, they are overwritten.)
Log files are created in the folder where each backup data is stored.
➠
10.2.1 ■8. Backup data
(1) File format
Item
File name, extension
File format
(2) Format
Item
Header
Backup setting
Start time
Target devices
Files
Backup/restoration status
*1 For RCPU, the long file names specified on GX Works3 are displayed in an abbreviated form
result.txt
SJIS format
Displays the executed operation type. ([BACKUP]: Backup, [RESTORE]: Restore
Displays the backup setting name.
Displays the start time for backing up or restoring.
Displays the CH No., network No., station No., CPU No., unit type, and model of the
target device when backing up or restoring.
The following shows the display contents for unit types.
• PLC: PLC CPU
• MC : Motion controller
• SV : Servo Amplifier
• INV : Inverter
• RC : Robot controller
Displays the backed up or restored flies.
Recorded only when network batch backing up or restoring.
Displays the number of controllers which the backup/restoration is completed, the
number of all target controllers, the number of controllers which backup/restoration is
completed, and the number of errors, by station.
Setting
Header
Backup setting
Start time
Backup/restore status
Target devices
Files
Backup/restore status
Setting
*1
10.2 Specifications
10
10 - 15