Mitsubishi Electric GOT2000 Series User Manual page 637

■3. [Scale setting] tab
Set the scale increment (interval between scale marks).
1) Item switching keys
Switch between the contents in the item list.
2) Item list
Lists the scale increments and units of all items.
Each item has a different setting range.
You can set a value with up to two decimal places. (The value set for [Time] must be an integer.)
■4. [Cursor setting] tab
Switch between the vertical and horizontal cursors, and set an item for which the cursors are displayed.
Define a range by the cursors to display the maximum and minimum values within the range.
1) Cursor orientation
Displays the current orientation of cursors.
To switch between the vertical and horizontal cursors, touch the [Switch cursor] key.
• [Cursor setting (vertical)]
• [Cursor setting (horizontal)]
2) [Switch cursor] key
Switches between the vertical and horizontal cursors.
3) [Waveform]
Select the item for which the cursors are displayed.
4) [Following waveform]
Turn on or off the waveform following function.
When the waveform following function is on, the cursors follow the waveform movements.
When the waveform following function is off, the cursors do not follow the waveform movements.
2)
1)
3)
4)
5)
7)
1)
2)
6)
23.5 [Graph waveform] screen
23
23 - 21