Mitsubishi Electric GOT2000 Series User Manual page 320

■2. DI/DO display screen
The following describes the display data of the DI/DO display screen and the key functions displayed on the screen.
(1) Displayed contents
1) [Input Signal], [Output Signal]
Displays whether the DI/DO signal is ON (lit) or OFF (not lit).
(2) Key functions
The table below shows the functions of the keys that are used for the operations of the DI/DO display screen.
1) [Menu] key
Returns to the function selection menu screen.
2) [End] key
Exits the servo amplifier monitor.
3) Key to call a screen
[DO1] key
[Func.Dev.] key
[Amp.Inf] key
[ABSdata] key
[UnitCompo.] key
9 - 20
9.4 Operations of Servo Amplifier Monitor Screens
1)
3)
4) 5)
Item
Displays the DI/DO signal of the extension IO unit.
This is valid only when MR-J2M-P8A is connected.
Changes to the function device screen.
➠
■3. Function device display screen
Changes to the amplifier information screen.
➠
■4. Amplifier information display screen
Changes to the ABS data screen.
➠
■5. ABS data display screen
Changes to the unit composition list screen.
➠
■6. Unit composition list display screen
1) 2)
Description