Setting Method For Other Station Monitoring - Mitsubishi Electric GOT2000 Series User Manual

8.4.2

Setting method for other station monitoring

The following shows the setting methods for monitoring other stations with intelligent module monitor.
Step 1.
When the intelligent module monitor is started for the first time, the communication setting window is
automatically opened by displaying the system configuration screen.
Otherwise, touch the [ChNETPLCNo.] key in the System Configuration screen to display the communication
setting window.
Step 2.
In the communication setting window, select one from channels No.1 to 4.
For the operation on the communication setting screen, refer to the following.
➠
Step 3.
When the channel No. is selected, the screen below is displayed.
Set the network number of the target controller and the CPU station number.
Step 4.
After selecting the station number, touch the enter key. The communication setting window closes and the
system configuration of the set monitor destination is displayed.
For further operations, refer to the following.
➠
8 - 12
8.4 Operation of Each Intelligent Module Monitor Screen
■1. Communication setting window
8.4.6 Specifying a module to monitor and selecting monitor menu