Specifications; System Configuration - Mitsubishi Electric GOT2000 Series User Manual

6.2

Specifications

➠

6.2.1 System configuration

6.2.2 Network information that can be monitored
6.2.3 Access range
6.2.4 Precautions
6.2.1 System configuration
This section describes the system configuration of the network monitor.
For connection type settings and precautions regarding the communication unit/cable and connection type, refer to the
following.
➠
GOT2000 Series Connection Manual (Mitsubishi Products) For GT Works3 Version1
■1. Target controller
RCPU
QCPU (Q mode), motion controller (Q series)
LCPU
QnACPU
ACPU/QCPU (A mode)
Motion controller (A series)
*1 For the motion controller CPU (Q series), only the PLC CPU area (CPU No.1) in the Q170MCPU and Q170MSCPU can be
monitored.
■2. Connection type
This function can be used in the following connection types.
(1) RCPU
○: Available, ×: Unavailable
Function
Name Description
Monitors the
statuses of the
following networks.
Network
• CC-Link IE
monitor
controller network
• CC-Link IE field
network
*1 Indicates the CC-Link IE controller network connection.
*2 Indicates CC-Link IE field network connection.
*3 Indicates CC-Link connection (Intelligent device station).
*4 Indicates CC-Link connection (via G4).
Controller
*1
Connection type between GOT and controller
Serial
Bus Direct CPU
communication
connection
connection
connection
× ○
MELSEC
NET/H
Ethernet connection,
connection
connection MELSEC
CC-Link IE field
NET/10
connection
connection
○ ×
6.2 Specifications
6
CC-Link
CC-Link IE
connection
controller
*1
,
*3 *4
ID G4
*2
○ ○ ×
6 - 3