Specifications; System Configuration - Mitsubishi Electric GOT2000 Series User Manual

9.2

Specifications

➠
9.2.1

System configuration

This section describes the system configuration of the servo amplifier monitor.
For connection type settings and precautions regarding the communication unit/cable and connection type, refer to the
following.
➠
■1. Target controller
Servo amplifier
MELSERVO-J2-Super series
MELSERVO-J2M series
MELSERVO-J3 series
MELSERVO-J4 series
■2. Connection type
(○: Available, ×: Unavailable)
Name
Servo amplifier monitor
■3. Required system application (extended function)
For the system application (extended function) required, refer to the following.
➠
(1) System application (extended function)
Write the package data that contains the system application (extended function) for the servo amplifier monitor to the
GOT.
For the communication method with the GOT, refer to the following.
➠
(2) System application (extended function) size
To install a system application (extended function) to the GOT, enough space in the user area is required.
For information on how to check the available space of the user area and each data size, refer to the following.
➠
■4. List of servo amplifier types that can be monitored and functions
The list of servo amplifier types that can be monitored and their functions is shown below.
(1) MELSERVO-J2-Super series and MELSERVO-J2M series
(○: Monitoring is possible with the servo amplifier monitor ×: Monitoring is not possible with the servo amplifier
monitor - : Function unavailable)
Setup
9 - 4
9.2 Specifications
9.2.1 System configuration
9.2.2 Access range
9.2.3 Precautions
GOT2000 Series Connection Manual (Mitsubishi Products) For GT Works3 Version1
Function
Servo amplifier monitor, changing the
servo parameter settings and test
operations
1.2 System Applications (Extended Functions) Required for Each Function
GT Designer3 (GOT2000) Screen Design Manual
GT Designer3 (GOT2000) Screen Design Manual
Function
Model selection
*1
Baud rate
*1
Station No. Selection
Station selection
Axis selection
Automatic demo
MR-J2S-□A, MR-J2S-□CP
MR-J2M-P8A
MR-J3-□A
MR-J4-□A, MR-J4-□A-RJ
Description
MELSERVO-J2-Super series
MR-J2S-□A MR-J2S-□CP
○
○
○
○
-
×
Model
Connection type between GOT and servo amplifier
Direct connection
○
Servo amplifier
MELSERVO-J2M series
MR-J2M-P8A
○ ○
○ ○
○ -
○ ○
- ○
- -
MR-J2M-□DU
○
○
-
○
○
×