Operations For Display - Mitsubishi Electric GOT2000 Series User Manual

21.3 Operations for Display

■1. Starting the network status display
The following describes how to display the network status display screen after the GOT is turned on.
Step 1.
Turn on the GOT.
Step 2.
Display the network status display screen by one of the following methods.
• Starting from the special function switch (Network status display) set in the project
For how to set special function switches, refer to the following.
➠
• Starting from the utility
In the utility, touch [Monitor] → [Network status display] from the Main Menu.
For how to display the utility, refer to the following.
➠
■2. Changing screens
21 - 2
21.3 Operations for Display
GT Designer3 (GOT2000) Screen Design Manual
GOT2000 Series User's Manual (Utility)
user-created monitor screen
[×] key
Network status display
Start
Utility Main Menu
or