Error Messages And Corrective Action - Mitsubishi Electric GOT2000 Series User Manual

Key
[Back]
(1) Communication setting window
(a) Display monitor
1) 3)
The information shown in the table below is displayed.
No.
1) CH No. input area
2) Network No. input area
3) Station No. input area
4) CH No. selection key
5) Keys
(b) Key functions
Input area move

11.5 Error Messages and Corrective Action

The following shows the error messages for the MELSEC-L troubleshooting and the corrective actions.
Error message
Communications error
11 - 6
11.5 Error Messages and Corrective Action
Closes the MELSEC-L troubleshooting and returns the screen to the one for starting the
MELSEC-L troubleshooting.
2)
Item
Set the CH No. for the target controller.
Set the network No. for the target controller.
Set the station No. of the target controller.
When the station No. is set to the host station (FF), set the network No. to 0.
Select a CH No.
Displays the keys used in the operation in the communication setting window.
Key
Closes the communication setting window.
[×] When any of the CH No., network No., and station No. is not input and the monitor
target is not set, the communication setting window does not close.
Moves the cursor among the input areas.
[AC] Deletes all the input values and characters.
[Del] Deletes an input value or character.
Moves the cursor when the cursor is in the CH No. input area, network No. input
[Enter]
area, or station No. input area.
Description
Communication could not be established
with the PLC CPU.
Function
1) 3)
4)
Display contents
Function
Check the connection status between the PLC CPU
and the GOT. (Check if the connector is disconnected
or the cable is broken.)
Check if an error has occurred in the PLC CPU.
2)
Corrective action
5)